SSC JE Exam Syllabus 2018 Download Exam Pattern & Previous Papers PDF

SSC JE Syllabus & Exam Pattern PDF Download, SSC JE Exam Pattern 2018, SSC JE Syllabus 2018, SSC JE New Paper pattern 2018, SSC JE Exam Syllabus 2018

SSC JE Exam Syllabus 2018

Here is a Latest News for all candidates who are going to apply or applied for SSC JE Exam 2018 so for all of them on this page we are going to provide whole SSC JE Exam Syllabus and Exam Pattern as well. (SSC) Staff Selection Commission has been going to conduct an exam which name is (JE) Junior Engineer Paper Wise. Like Paper-1 and Paper-2. And Paper 1 Exam is going to conduct on 2018, Paper 2 Exam is going to conducted on 2018. So, those candidates who have applied for this latest SSC JE Recruitment and those who have started their exam preparation so they must need their SSC JE Exam Syllabus and Exam Pattern. On this page, we provide everything which relates SSC Syllabus and Exam Pattern of SSC JE Exam. For More Details Regarding SSC JE Syllabus and Exam Pattern visit to the official site of SSC that is ssc.nic.in.

SSC Junior Engineer Syllabus 2018 Download Exam Pattern

  • Name of The Organisation: (SSC) Staff Selection Commission
  • Name of Exam: SSC (JE) Junior Engineer
  • Name of The Post: Junior Engineer
  • SSC Paper 1 Exam Date:
  • SSC Paper 2 Exam Date:
  • Category: Syllabus
  • Official Site: ssc.nic.in

SSC JE Exam Pattern Paper-1

SSC JE Exam 2018 Subject Name Number of Questions Marks Time
Paper-1 (MCQs) General Intelligence & Reasoning 50 50 2 Hours (120 Minutes)
General Awareness 50 50
Part –A: General Engineering (Civil & Structural) 100 100
Part –B : General Engineering (Electrical)
Part –C : General Engineering (Mechanical)

SSC JE Paper 1 Exam Syllabus

Sectioned Asked  Syllabus
General Intelligence and Reasoning Similarities, Space Visualization, Questions on analogies, Differences, Analysis, Problem Solving, Decision Making, Judgment, Discrimination, Relationship Concepts, Visual Memory, Observation, Verbal and Figure Classification, Arithmetical Reasoning, Arithmetical Number Series.
General Awareness In this section questions will be asked from Geography, History, Culture, General Polity and Scientific Research, Economic Scene.
General Engineering (Civil and Structural), (Electrical and Mechanical) Part-A: Civil Engineering Part-B: Electrical Engineering Part-C: Mechanical Engineering

Topic Wise Complete detail of Part-A, Part-B, and Part-C listed below.

Part A (Civil Engineering) & Structural Engineering Part B (Electrical Engineering) Part C (Mechanical Engineering)
For Civil Engineering: Estimating, Building Matericals, Surveying, Costing and Valuation, Hydraulics, Soil Mechanics, Transportation Engineering, Irrigation Engineering and Environmental Engineering.

 

For Structural Engineering: Concrete Technology, Theory of Structures, Steel Design and RCC Design.

Circuit Law, Basic Concepts, AC Fundamentals, Magnetic Circuit, Electrical Mechanics, Measurement and Measuring Instruments, Synchronous Machines, Fractional Kilowatt Motors and Phase Induction Motors, Transmission and Distribution, Generation, Utilization and Electrical Energy, Estimation and Costing and Basic Electronics. Engineering Mechanics and Strength of Material, Theory of Machines and Machine Design, 1st Law of Thermodynamics, 2nd Law of Thermodynamics, Properties of Pure Substances, IC Engineer Performance, Air Standard Cycles for IC Engines, IC Engine Cooling and Lubrications, IC Engines Combustion, Boilers, Ranking Cycle of System, Specification, Classification, Air Compressor & their Cycles, Specification, Fitting & Accessories, Principle of Refrigeneration Plant, Refrigeration Cycles, Nozzles & Steam Turbines, Fluid Statics, Properties & Classification of Fluids, Fluid Kinematics, Measurement of Fluid Pressure, Measurement of Flow Rate, Dynamics of Ideal Fluids, Hydraulic Turbines, Basic Principles, Classification of Steels, Centrifugal Pumps.

SSC JE Paper 2 Exam Syllabus

For Civil Engineering

Topics Details
Building Materials Classification, Physics and Chemical Properties, Standard tests, Use and Manufacture/ quarrying of materials e.g. silicate based materials, building stones, cement (Portland), Timber and Wood based products, asbestos products, bituminous materials, Laminates, Estimating, Paints, Varnishes.

 

Costing and Valuation: Glossary of technical terms, Method and unit of Measurement, Analysis or Rates, Items or Work – Brick Work (Modular & Traditional Bricks), Shuttering, RCC Work, Timber Work, Flooring, Painting, Boundary Wall, Plastering, Water Tank, Brick Building, Bar bending schedule, Septic tank, Centre Line Method, Trapezoidal formula, Mid-section formula. Cost estimate of Septic tank, Tube well, Flexible pavements, Isolated and combined footings, Piles and Pile-caps, Steel truss. Scrap Value, Valuation –  Value and cost, Assessed value, Salvage value, Depreciation and Obsolescence, Sinking fund, Methods of Valuation.

Surveying Measurement of Distance, Principles of Surveying, Work of Prismatic Compass, Chain Surveying, Compass Traversing, Plane table surveying, Bearing, Local Attraction, Adjustment of the odolite, theodiolite traversing, Contouring, Defination of terms used in leveling, Curvature and refraction corrections, Contouring, Uses of Contour map, Temporary and Permanent adjustment of dumpy level, Curve Setting, Methods of Contouring, Earth work calculation, Tachometric Survey, Advanced Surveying equipments.
Soil Mechanics Phase Diagram, Origin of Soil, Degree or Saturation, Definitions void ratio, Porosity, Specific gravity of Soil grain, Water Content, Density index and interrelationship of Different Parameters, Unit Weights, Index Properties of Soils, Grain Size Distribution curves and their uses, ISI Soil Classification and Plasticity chart, Atterberg’s Limits. Coefficient of Permeability, Permeability of Soil, Unconfined and confined aquifers, Determination of coefficient of permeability, Quick Sand, Effective Stress, Principles of consolidation,

Consolidation of Soils, Degree of consolidation, Principles of consolidation, Reconsolidation Pressure, e-log P curve, Normally consolidated soil, computation of ultimate settlement. Direct shear test, Shear strength of soils, Vane shear test, Soil compaction, Triaxial test, Laboratory compaction test, Earth pressure theories, Maximum dry density and optimum moisture content, Bearing capacity of Soils, Active and Passive earth Pressure, Plate load test, Standard Penetration test.

Hydraulics Hydrostatics, Fluid Properties, Flow through pipes, Bemoulli’s theorem and its Application, Measurement of flow, Flow in open channels, Flow through pipes, Spillways, Flumes, Pumps and turbines.

Irrigation Engineering: Necessity, Defination, Benefits, Types and methods of Irrigation, 2II effects of Irrigation, Hydrology – Measurement of rainfall, Rain gauge, run off coefficient, Losses from Previpitation – Infiltration, Evaporation etc. Duty, Water requirement of crops, Kharif and Rabi crops, Delta and base period, Command area, Crop Ratio, Time Factor, Irrigation effencies, Overlap allowance. Different type of canals, Loss of water in canals, types of canal irrigation. Canal lining – types and Advantages. Tiled from a well, Shallow and deep to wells. Failure or weirs and permeable foundation, Weir and barrage, Kennedy’s theory of critical velocity, Slit and Scour. Defination of Flood, Lacey’s theory of uniform flow. Methods of flood control, Causes and effects, Preventive measure, Water logging. Characteristics of a affecting fertility of soils, Land reclamation, Methods, Purposes, Description of Land and Reclamation Processes. Major irrigation projects in India.

Transportation Engineering Highway Engineering: Geometric Design, Cross Sectional Elements, Types of Pavements, Pavements Material – Different Tests, Aggregates and bitumen, Different Tests, Design of Flexible and Rigid Pavements, Gravel Road, (WBM) Water Bund Macadam and (WMM) Wet Mix Macadam, Rigid Pavement Joint, Bituminous Construction, Hiway Drainage, Pavement Maintenance, Ballast, Fixture and Fastening, Engineering Components of Pavement Way-Sleepers, Track Geometry, Track Junction, Points and Crossing, Stations and Yards, Track Junction. Traffic Engineering – Speed Flow Density and their interrelationships, Different Traffic Survey, Traffic Signals, Intersections and Interchange, Traffic Signs and Marking, Traffic Operations, Road Safety.
Environmental Engineering purification of water, Quality of water, need of sanitation, source of water supply, sewer appurtenances, Surface water drainage, distribution of water, circular sewer, sewerage systems, sewage treatments, oval sewer, Solid waste management, engineered management system, types, effects. Air pollution – pollutants, control, causes, effects. Noise pollution – health effects, cause, control

For Structural Engineering

Theory of Structures Types of beams – determinate and indeterminate, Elasticity Constant, Cantilever and Over Hanging Beams, Bending moment and shear force diagrams  of simply supported. Bending moment and shear stress for tee, Moment of area and moment of inertia for rectangular & Circular Sections, Channel and Compound Sections, Eccentric loads, Chimneys, Dams and retaining walls, Slope of Deflection of Simply supported and cantilever beams, Eccentric loads, Torsion of Circular Section and Critical load and columns.
Concrete Technology Advantages and uses of Concrete, Properties, Importance of Water Quality, Cement aggregates, Workability, Water cement ratio, Storage, Mix Design, Mixing, Batching, Compaction, Placement, Quality Control of Concrete, Finishing and Curing of Concrete, Repair and Maintenance of Concrete Structures and Hot water and cold water concreting.
RCC Design Shear Strength, RCC- beams-flexural strength, Design of Singly reinforced and double reinforced beams, Bond strength, One way and two-way slabs, T-beams lintels, Reinforced brickworks. Isolated footings, Water tanks (RCC Design questions may be based on Limit State and Working Stress Method), Retaining Wall.
Steel Design Beams roof trusses plate girders, Steel design and construction of steel columns.

For Electrical Engineering

Basic Concepts

 

Inductance, Concept of Resistance, Capacitance and various factors affecting them. Voltage, Concept of current, Energy and their units and Power
Circuit Law Simple Circuit Solution using network theorems, Kirchhoff’s Law
AC Fundamentals R.M.S and average values of alternating waves, Instantaneous, Peak, Simple Series, Representation of Sinusoidal wave form, Resonance, Tank Circuit, Simple Series and Parallel AC Circuits consisting of R.L and C, Phase Power, Phase System – Star and Delta connection, DC and sinusoidal response of RL and R-C Circuit.
Measurement and Measuring Instruments 2 Wattmeter method of 3 phase power measurement. Measurement of Power (1 Phase and 3 Phase, both active and re-active) and energy.  Ammeter and voltmeter (both moving oil and moving iron type), Megger, Multimeter, Extension of range wattmeter, Use of CRO, Energy meter AC Bridges, CT PT and their uses, Earth fault detection.
Electrical Machines (A)   D.C Machine – Construction, Basic Principles of D.C Motor and Generator, Speed control and starting of D.C motors. Method of braking motor, Losses and efficiency of D.C Machines.

(B)   1 Phase and 3 Phase transformers – Construction, Equivalent Circuit, Principles of operation, voltage regulation, O.C and S.C Tests, Losses and efficiency. Frequency and wave from on losses, Effect of voltage. Parallel operation of 1 phase/ 3 phase transformers. Phase induction motors,  Principal of operation, Rotating magnetic field,  Torque-speed charactertics, Equivalent circuit, Starting and speed control of 3 phase induction motors. Method of braking, effect of voltage and frequency variation on torque speed charactertics.

Fractional Kilowatt Motors and Single Phase Induction Motors Synchronous Machines – Generation of 3 Phase e.m.f armature reaction, Charactertics and Applications, Parallel operation of two alternators, Voltage regulation, Generation, Starting and Applications of Synchronous motors, Synchronizing, Control of active and reactive power, Transmission and Distribution – Different types of power stations, Starting and Applications of Synchronous motors, Diversity factor, Load factor, Cost of generation, Demand factor, Power factor improvement, inter-connection of power stations. Types of faults, Various types of tariffs, Short circuit current for Symmetrical faults. Switchgears – Rating of Circuit breakers, H.R.C fuses, Principles of arc extinction by oil and air, Protection against earth leakage/ over current etc. Protection of feeders and bus bars, Merz-Price system of protection of generators and transformers, Buchholtz relay. Various transmission and distribution system, Lightening arresters, comparison of conductor materials, Efficiency of different system. Cable- Different type of cables, cable rating and derating factor.
Magnetic Circuit MMF, Concepts of flux, Different kind of magnetic materials, Reluctance, Magnetic calculations for conductors of different configuration e.g. Circular, Straight, Solenoid etc Self and mutual induction, Electromagnetic induction.
Estimation and Costing Electric installation of machines and relevant IE rules, Estimation of lightening scheme, Utilization of Electrical Energy, Earthing practices and IE rules, Electric heating, Illumination, Electric welding, Electric drives and motors, Electroplating.
Basic Electronics Working of various electronic devices e.g PN junction diodes, Transistors (PNP and NPN types), BJT and JFET. Simple circuits using these devices.

For Mechanical Engineering

Theory of Machines and Machine Design

 

Four bar linkage and link motion, Concept of simple machine, Flywheels and fluctuation of energy, Clutches – Plate and Conical clutch, Power transmission by belts – V belts and Flat belts, Gears- Type of gears, gear profile and gear ratio calculation, Riveted joint, Governors Principles and Classification, Bearings, Cams, Friction in collars and pivots.

Engineering Mechanics and Strength of Materials: Law of motion, Equilibrium of forces, Concepts of Stress and Strain, Friction, Elastic limit and elastic constants, Bending moments and shear force diagram, Torsion of circular shafts, Stress in composite bars, Bucking of columns – Euler’s and Rankin theories, Thin walled pressure vessels.

Thermal Engineering Properties of Pure Substances: P-v & P-t diagrams of pure substance like H2O (Water), Definition of Saturation, Introduction of steam table with respect to steam generation process, Wet & Superheated status, Definition of dryness fraction of steam, Degree of superheat of steam, H-s Chart of Steam (Mollier’s Chart )
1st Law of Thermodynamics 1st Law of Thermodynamics of cyclic process, Definition of stored energy & internal energy, Non Flow energy Equation, Conditions for Steady State Flow, Flow Energy & Definition of Enthalpy, Steady State Steady Flow Energy equations.
2nd Law of Thermodynamics Source Reservoir of Heat, Definition of Sink, Heat pump & refrigerator, Heat Engine, Kelvin – Planck & Clausius Statement of 2nd Law of thermodynamics, Thermal Efficiency of Heat Engines & co-efficient of Performance of Refrigerators, Entropy change calculation of ideal gas process, Absolute or Thermodynamics Scale of Temperature, Clausius Integral, Entropy, Camot cycle & Camot efficiency, PMM-2, Definition & its impossibility.
Air Standard Cycles for IC engines T-S Planes, Otto cycle, Plot on P-V, Diesel Cycle, Thermal Efficiency, Thermal Efficiecny. IC Engine Combustion, IC Engine Performance, IC Engine Cooling & Lubrication.
Rankine Cycle for Steam Simple Rankine Cycle Plot on P-V, H-S Planes, T-S, Rankine cycle efficiency with & without pump work, Boilers, Classification, Specification.
Fittings and Accessories Fire tube and Water tube boilers, Refrigeration Cycles, Air Compressors & their cycles, Principle of a Refrigeration Plant, Nozzles & Steam Turbines Fluid Mechanics & Machinery.
Properties and Classification of Fluid Newton’s law of viscosity, Ideal & real fluids, Compressible and incompressible fluids, Nowtonian and Non Newtonian Fluids.
Fluid Statics Pressure at a Point.
Measurement of Fluid Pressure Manometers, U-tube, inclined tube.
Fluid Kinematics Laminar & turbulent flow, Stream Line, Continuity equation, External and internal flow.
Dynamics of Ideal Fluid Total head, Bemoulli’s equation, Pressure head, Velocity head, Application of Bemoulli’s equation.
Measurement of Flow rate Basic Principles Pilot tube, Venturimeter, Orifice meter.
Hydraulic Turbines Principles, Classifications
Centrifugal Pumps Principles, Classifications, Production Engineering, Performance.
Classification of Steels Heat treatment of steel, mild steel & alloy steel, Welding – Arc Welding, Gas Welding, Special welding techniques, Resistance Welding, Welding – Arc Welding, Special Welding Techniques i.e. TIG, MIG etc. (Soldering & Brazing), NDT, Welding Defects & Testing, Foundry & Casting 0 defects, methods, forging, different casting processes, Extrusion etc. Metal Cutting Principles, Cutting tools, Basic Principles of Machining with (1) Lathe (2) Milling (3) Drilling (4) Shaping (5) Grinding, Machines, tools & manufacturing processes.

Click Here for SSC JE Syllabus 2018

Stay Connected with us for further updates of  SSC JE Exam Syllabus 2018. you can Book Mark our page by Pressing CTRL + D on your Computer.

Leave a Reply

Your email address will not be published. Required fields are marked *